Fluid Dispenser Allied High Tech ID-5x™

Description ID-5x™

The ID-5x™ fluid dispenser provides automatic, unattended application of abrasive polishing solutions and lubricants. This five (5) position dispenser connects to the back of the MetPrep 3x™ and MetPrep 4x™ grinders/polishers, and is controlled and programmed through the touchscreen. Positions 4 and 5 feature high-speed pumps for dispensing colloidal solutions, and a corrosion resistant magnetic stirring function for use with polishing slurries that normally settle.

The integrated dispenser (ID) features a pivoting manifold mounted on the powerhead to position the dispensing nozzles so liquids clear the sample holder.

Features ID-5x™

• Five (5) dispensing positions, 16 oz. (500 mL) capacity
• Dispenses fluids based on operator's input values (pulses/minute, pulse length)
• Provides repeatable fluid dispensing for consistent results
• Integrates with MetPrep 3x™ and MetPrep 4x™ grinders/polishers equipped with PH-3™, PH-4™ or PH-6™ powerhead\
• In-cycle priming that allows temporary "full rate" dispensing during use
• Pre-dosing function provides option to "charge" the cloth at the beginning of each cycle
• Pump reverse after cycle to prevent dripping/contamination
• Positions 4 and 5 offer high speed pumps for oxide polishing, rinse/flush function to eliminate clogging when using oxide solutions, and magnetic stirring for use with non-suspended abrasives
• Pulse duration: 0.5 – 6 seconds, 0.1 second increments
• Pulse frequency: 1 – 10 per minute
• 24 V DC power provided by grinder/polisher
• Dims: 8" W x 25" D x 9" H (203 x 635 x 229 mm)