Cyclic Salt Spray Chamber Haida HD-E808-90
Hotline: +84 906 988 447
Head Office: Ho Chi Minh City
- Tel: +84 2839 778 269 / 3601 6797
- Email: [email protected]
- Add: 487 Cong Hoa Street, Tan Binh Ward, Ho Chi Minh City, Vietnam
Office: Bac Ninh City
- Tel: +84 222 730 0180
- Email: [email protected]
- Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh, Vietnam
-
Technical Counseling
100% Free
-
Free Shipping
For 3.000.000vnd Order
Data is being updated
Description
Cycle Salt Spray Chamber can be used to test the salt fog resistant performance of materials, products and their coatings. Such as, parts, electronic components, metal materials of protective layer and industrial products. They can also be used to evaluate the quality of the coatings.
The Use
Cycle Salt Spray Chamber can perform multiple tests, including: Salt Fog, Heating and Cooling, Humidity, Drying.The tests are programmable. You can set the test procedures according to your requirements.
Standard Parameters
| Model | HD-E808-160-1 |
| Internal size (L*W*H) | 1600*1000*600mm |
| External size (L*W*H) | 3000*1650*1700mm |
| Equipment material | Both inside & outside shell adopt P.V.C rigid plastic board |
| Temperature range | Ambient~60℃ (No humidity if temp. below +25℃) |
| Temperature fluctuation | ±2℃ |
| Humidity range | 30% – 98% |
| Temperature fluctuation | ±3%RH |
| Salt spray test | Concentration of salt solution: 5% Spray quantity: 1.0~2.0 ml / hr / 80cm2 PH value: 6.5~7.2 (at ambient temperature) |
| Spraying method | Continuous and Periodic spray type |
| Lab volume | 960L |
| Brine tank capacity | 40L |
| Multiple safety protection devices | Over pressure protection, over temperature protection, over load fuse protection |
| Air source | 2.5HP Air pump, pump capacity with 60L or above (provided by buyer) |
| Power supply source | Single-phase, 220V±10%, 50/60Hz |
Accessories
Please login to write review!